Industry News
Contact Us
Email:Jesingd@vip.sina.com
Msn:
Skype:Jesingd
Tel:86-010-62574092
Fax:86-010-62441147
  • news >> Industry news >> Cold chamber die casting machine
  • Cold chamber die casting machine
  • Cold chamber die casting machine

    Cold chamber machines are used for alloys with high melting temperatures that can not be cast in hot chamber machines because they would damage the pumping system. Such alloys include aluminum, brass, and magnesium. The molten metal is still contained in an open holding pot which is placed into a furnace, where it is melted to the necessary temperature. However, this holding pot is kept separate from the die casting machine and the molten metal is ladled from the pot for each casting, rather than being pumped. The metal is poured from the ladle into the shot chamber through a pouring hole. The injection system in a cold chamber machine functions similarly to that of a hot chamber machine, however it is usually oriented horizontally and does not include a gooseneck channel. A plunger, powered by hydraulic pressure, forces the molten metal through the shot chamber and into the injection sleeve in the die. The typical injection pressures for a cold chamber die casting machine are between 2000 and 20000 psi. After the molten metal has been injected into the die cavity, the plunger remains forward, holding the pressure while the casting solidifies. After solidification, the hydraulic system retracts the plunger and the part can be ejected by the clamping unit. The clamping unit and mounting of the dies is identical to the hot chamber machine. See the above paragraph for details.

    Vivian

HOME | Profile | Products | Industry News | Equipments | Contact US | Sitemap
OMM @ ALL RIGHTS RESERVED Oriens Metal Manufacturing Co.Ltd
keywords:metal stamping,steel stamping,investment casting,precision casting,metal casting,crate clip,toggle latch