Product
METAL STAMPING PARTS CLIP LASER CUTTING HARDWARE PART CNC MACHINING CASTING FASTENER DEEP DRAWN PART
Processes
stamping laser cutting sheet-metal working casting CNC Machining welding technology riveting surface treatment
About Us
Company Our team Qualification Honor Customer case
Quality Assurance
Process guarantee Daily inspection Control process
News
Company Dynamics Media Reports
Contact Us

News

Home  -  News  -  Company Dynamics

CNC lifting and transportation

Nov 08,2022



The special lifting tools provided by the manufacturer shall be used for the lifting and positioning of the machine tool, and other methods are not allowed. No special lifting tools are required, and steel wire ropes shall be used to lift and place according to the parts specified in the instructions.

Foundation and location


The machine tool shall be installed on a firm foundation and away from the vibration source; Avoid sunlight and heat radiation; Place in a dry place to avoid the influence of moisture and airflow. If there are vibration sources near the machine tool, anti vibration ditches must be set around the foundation.


Installation of machine tool


When the machine tool is placed on the foundation, it should be leveled in a free state, and then the anchor bolts should be locked evenly. For ordinary machine tools, the level reading shall not exceed 0.04/1000mm, and for high-precision machine tools, the level shall not exceed 0.02/1000mm. The installation accuracy shall be measured at a constant temperature. The measuring tool shall be used after a period of constant temperature. During the installation of the machine tool, try to avoid the installation method of forcing the machine tool to deform. During the installation of the machine tool, some parts of the machine tool should not be removed randomly. The removal of parts may lead to the redistribution of stress in the machine tool, thus affecting the accuracy of the machine tool.


TOP